Showing posts with label home improvement. Show all posts
Showing posts with label home improvement. Show all posts

Saturday, May 26, 2012

How to cover your {ugly} walls

Missed everyone while I was gone.  It has been a crazy few months.  Getting Little S ready for school and Mr S has been so busy with work.  I, too, have been busy doing freelance work for a few clients, so forgive me my absence, please. :)


Hope you are all doing well and as promised (if not much later than I intended) here is how I covered the ugly walls of my sunroom for Mr S's big 30th birthday bash! {Seen here}


Materials/Tools:
Fabric of your choice ( I chose white satin)
Dowel rods (I used 3/8") or curtain rods that you will use
Command hooks (check the weight) 2 for each panel
Measurement of walls you need to cover {height x width(2)}


Steps:
1.  Cut your fabric to twice the measurement of the wall you wish to cover. Adding 4" to the length.  If you want/need to sew the sides, give yourself an extra inch in width as well. 


Note:  In my case, I needed several different sizes and chose to cut and sew them all at one time, so I labeled them "a", "b", "c" etc to keep from getting confused and stuck sticky notes to the wall with the corresponding letter.


2.  Turn the top edge under 1/2" and press, then turn another 2" and press.  Stitch a 1/4" along the edge to create a pole pocket for the dowel.  **You can do the pole pocket whatever size you like.  I created a generous pocket as to allow me to use these on different dowels in the future**


3.  Turn the bottom edge 1-1/2" and stitch a bottom hem.
**If you were going to turn the sides in and sew them, do that before the pole pocket/hem**


4.  Place command hooks at the edges of the walls you wish to cover.  Make sure you leave room to put the dowel over the hook.


5.  Cut the dowels to fit the hooks (they can extend to just the edges, but they fall kind of easily, so let them extend slightly passed the hooks.  Once they are cut, thread them through the pole pocket.


6.  Hang them on the hooks and....


Voila!! Your ugly wall is temporarily covered.  This whole method could work for making curtains too, just make sure you make it all look pretty and neat if you're trying to do curtains.  Here are a few shots of my unfinished sun room with it's white satin wall covers.
Not a permanent solution, but a perfect, cheap,
short term solution!

With the black table cloths, red tissure paper flowers, and white curtains,
it isn't noticable that the room isn't finished!


Links to sites I used: White Satin  http://www.onlinefabricstore.net/satin-fabric/bridal-satin-white-fabric-.htm
More white satin:  http://www.efavormart.com/108x50ydtullebolt-white.aspx  (the fabric from here was much thinner than what i orderd from amazon, but it worked well)
Black table cloth:  http://www.smartyhadaparty.com  We bought these for our wedding and have kept them for occasions such as this!
Dowels:  Michael's
Command Hooks:  Walmart


All in all, the panels cost me about $40.  The reason I didn't bother with side seams on any of them is because I wanted to be able to use the fabric later, since it was the most expensive part.  Hopefully, this inspires you dress up your home without breaking the bank for your next party!


Friday, March 30, 2012

The Little Table that Could


Ever just get lucky?  Like designer lucky?  It happens to Mr. S and I a bit.  And I'm learning something from it...
Make a piece work for YOU even if it is an "antique" piece, it doesn't have to stay in it's original style/color/finish.  Especially if that style/color/finish doesn't work with your home.  I've tried over and over to force-fit things into my life that I didn't {LOVE} because they were antiques and I was afraid to change them!  But fear no more! :)  I just decided this weekend, if I'm going to cherish everything exactly as it is, I will ALWAYS have a "designer's block".  

So here's the {antique} table that became the crowning glory of my breakfast nook.

First, you should know this table was FREE.  Always, always, always think about what you can do with Free.  Especially if you are on a budget.

                                 
The original table top sanded down to a beautiful, natural color with it's pits and scrapes.

An amazing thing happens if you just sand down or strip a product down.  Suddenly, you have a blank canvas.  You can be inspired anew!  It's ok to change directions after you've started.  Mr. S and I sanded this table and pedestal down before picking out stain colors, because we figured the color didn't matter until the stripping was done!  I'm glad we waited because we ended up agreeing on a brighter green than previously imagined. :)

The pedestal base.  I'm in LOVE with the green

The top after being stained a honey oak color.


At the moment, I don't have dining chairs that I love, but I've been inspired by the vibrant green of the pedestal, which is a complete stain-newbie mishap.  I didn't TEST the green stain before using it, nor did I use a wood conditioner to make the stain take evenly.  I ended up with a very uneven, more vibrant, green than I had anticipated.  And honestly, I love it!  I feel like I always fall back on Bob Ross when it comes to art, but he always said "there are mistakes, just happy little accidents" (at least that's the way I remember it). And I totally believe that.

And the finished product???

My beautiful, inspiring {very} green table! :)
This is my $25 breakfast masterpiece!  All $25 went to sand paper, stain, and brushes.  I own an orbital sander and used that for all of our sanding except on the curves of the legs and there is one metal band around the bottom that I want to cover with a copper strip {or spray copper} but for now, it is just there and we don't notice it.

The one thing I would say is that I felt the Polyeurethane/Stain in one (I used on the top) did not work very well.  Maybe this is just me?  Anyone else have trouble with that?  Whenever I wipe my table clean, it seems the stain/poly is coming off of my table.  Any others encounter this or know what I've done wrong?

There once was a kitchen inspired entirely by green Marjolica pottery.  If I ever find that magazine/article, I will link it for you to see!  This table reminds me of that kitchen!  Now...what to do for chairs...

Monday, March 19, 2012

M.I.A. in the quiet blogsphere...

>tree frogs singing....owl hooting...breeze in the trees<  
Wow...it's quiet out here...Sorry I've been M.I.A.  It's certainly isn't for lack of WANTING to blog.  My {not so great} camera had decided it doesn't want to give up the photos of my living room!  Evil thing.  So I am trying to find a way to download photos.  I may have to break down and go buy an adapter for the memory card so I can just put that in my computer....don't you just love technology! :)  Either way, here are some iPhone photos of future projects to keep you updated!

Picking a Paint Color!

Breakfast Nook Table Restoration

Industrial Cart Coffee Table {for less}

Recreating a {favorite} Pillow